Bruntons introduces replaceable needle-bearing system for Autoprop H5 and APS models
13 November 2026

Updated bearing design brings proven engineering from Bruntons' larger propellers to its award-winning Autoprop H5 and APS models, supporting long-term serviceability.

British marine propulsion specialist Bruntons Propellers is introducing an updated bearing system for selected models in its award-winning Autoprop range at METSTRADE 2026 in Amsterdam.

The new needle-bearing arrangement draws on technology already used in Bruntons' larger propellers. Developed for the Autoprop H5 and APS saildrive models, as well as corresponding Eco*Star variants, it allows the bearing components to be replaced using basic tools and the Autoprop tool kit, making long-term servicing more straightforward for boat owners and marine engineers. 

Responding to changing demands on sailing yachts


The development reflects changing demands on marine propulsion systems. Today's cruising yachts and catamarans are increasingly fitted with more powerful engines, while some vessels, particularly those operating in commercial charter fleets, spend extended periods under power.

Bruntons identified the opportunity to adapt its existing bearing technology through its extensive propeller manufacturing and servicing experience, combined with feedback from customers, including an operator of approximately 40 charter boats in Greece.

Boats are getting bigger, engines are becoming more powerful and the way people use their yachts is changing. Working closely with our customers and listening to their experiences has been an important part of this development. We've taken an established bearing design from our larger propellers and adapted it for the H5 and APS models, making them more straightforward to maintain over the long term.

David Sheppard Sales & Marketing Director at Bruntons Propellers

Engineering for long-term serviceability
 

Developed by Bruntons' in-house engineering team, the updated arrangement builds on decades of propeller manufacturing expertise and practical experience of how sailing yachts and their propulsion systems are used.

Previously, the H5 and APS models featured a roller-bearing arrangement with wear surfaces machined directly into the bronze blade and hub components. These could be reconditioned to restore the propeller to service, although the process could only be repeated a limited number of times.

The redesigned system incorporates replaceable needle-bearing components, allowing the bearing arrangement to be renewed as required without repeatedly reconditioning the original machined surfaces. This supports the long-term serviceability of the propeller and helps extend the working life of the overall assembly.

For cruising sailors and charter operators in particular, the ability to replace the bearing components without specialist machining offers a practical advantage, helping to simplify servicing and potentially reduce downtime. 

Autoprop has long been a choice for cruising sailors, including those undertaking extended passages where efficient propulsion under power is important. The updated bearing arrangement builds on this heritage, supporting the propeller's long-term serviceability while retaining the need for regular inspection and servicing.

The new bearing arrangement will be fitted as standard to relevant new H5 and APS models, including corresponding Eco*Star variants. Bruntons has also developed a means of retrofitting compatible existing propellers with the updated system.

 
Meet Bruntons at Metstrade


Bruntons' Sales & Marketing Director David Sheppard will be joined by mechanical engineer Stefano Cova and technical manager Dan Woolgar at Metstrade, 17–19 November 2026, on stand 03.410.

The team will be available to demonstrate the new bearing arrangement using physical components, explain the engineering behind its development and answer questions from journalists and marine professionals.